铝/钢层状复合材料的研究开发及工业应用
-
摘要: 铝/钢层状复合材料不但可以满足多类结构材料对强度、耐腐蚀性、导热性等多种性能要求,而且还可以节省铝合金的使用,显著降低各种装备的材料成本。文章对铝/钢层状复合材料的发展情况进行了简要回顾,介绍了铝/钢层状复合材料的主要制造技术及加工方法,分析了各种生产工艺的优缺点,阐述了铝/钢层状复合材料的典型应用,指出低成本、连续化制造高品质、大规格、功能性铝/钢层状复合材料的轧制生产技术是今后研究发展的主要方向。
-
[1] [1]周组福.复合材料学.武汉:武汉工业大学出版社, 1995:2 [2] [2]Li L, Nagai K, Yin F.Progress in cold roll bonding of metals.Sci Technol Adv Mater, 2008, 9:023001 [3] [3]崔建忠.铝/不锈钢复合板—绿色炊具材料.五金科技, 2 0 0 3, 31 (1) :33 [4] [4]Cooman B C D, Dillen H, Storms H, et al.Ageing in aluminized steel sheet:an industrial application of high frequency internal friction measurements to point defect-interface interactions.Journal of Alloys and Compounds, 1994, 211:619 [5] [5]Bay N.Cold welding part 2 process variants and application.Metal construction, 1986, 8:486 [6] [6]井玉安, 王晨宇.不锈钢复合板生产技术综述.鞍山科技大学学报, 2007, 30 (6) :590 [7] [7]彭大暑, 刘浪飞, 朱旭霞.金属层状复合材料的研究状况与展望.材料导报, 2000, 14 (4) :23 [8] [8] 千葉昂, 藤田昌大, 頓田英機, 外本和幸.爆発圧接法によるステンレス鋼/アルミニウム系複合材料の作製と二, 三の性質爆发压接法.日本複合材料学会誌, 1983, 9 (3) :108 [9] [9]马志新, 胡捷, 李德富, 等.层状金属复合板的研究和生产现状.稀有金属, 2003, 27 (6) :799 [10] [10]于九明, 孝云祯, 王群骄.金属层状复合技术及其新进展.材料研究学报, 2002, 14 (l) :12 [11] [11]谢建新, 刘静安.金属挤压理论与技术.北京冶金工业出版社, 2001:157 1986—2016 [12] [12]敖炳秋.轻量化汽车材料技术的最新动态.汽车工艺与材料, 2002, (8/9) :1 [13] [13]吴锦波, 马晓春.铸造法制金属基复合材料研究进展.材料科学与工程, 1996, 14 (2) :15 [14] [14]徐映坤, 陈贵云, 田冲, 等.喷射沉积及气体扫描技术制备铝锡-钢双金属复合板材.材料科学与工艺, 2001 (9) :243 [15] [15]刘中表, 邸斌.异种材料的焊接.北京:科学出版社, 1990:204 [16] [16]史中利, 卢亚文.粘接技术在设备维修中的应用.北京:冶金工业出版社, 1992:153 [17] [17]张增志, 牛俊杰, 付跃文.感应熔覆镍基合金粉末涂层工艺和性能研究.材料热处理学报, 2004, 25 (2) :31 [18] [18]周德敬, 陈智, 张新明, 等.Si含量对轧制复合铝刚层状复合材料界面化合物组织形貌的影响.金属热处理, 2014, 39 (1) :42 [19] [19]Springer H, Kostka A, Payton E J, et al.On the formation and growth of inter-metallic phases during inter-diffusion between low-carbon steel and aluminum alloys.Acta Materialia, 2011, 59 (4) :1586 [20] [20]Kobayashi S, Yakou T.Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment.Materials Science and Engineering A, 2002, 338 (1) :44 [21] [21]Weng-Sing Hwang.Effects of heat treatment on mechanical property and microstructure of aluminum-stainless steel bimetal plate.Journal of Engineering Materials and Technology, 2012, 134 (1) :1 [22] [22]Yahiro A, Masui T, Yoshida T, et al.Development of nonferrous clad plate and sheet rolling with different temperature of materials.ISIJ Intemational, 1991, 31 (6) :647 [23] [23]Jindal Vikas, Srivastava V C, Das Arpan, et al.Reactive diffusion in the roll bonded iron-aluminium system.Materials letters, 2006, 60:1758 [24] [24]曾时明.电站直接空冷式翅片管换热和流动规律及坑冷单元流场特性数值研究[学位论文].北京:北京交通大学:2007 [25] [25]马韬.直接空冷管束复合带材的研究.电站辅机, 2013, 34 (3) :5 [26] [26] 柿本悦二.爆発圧着クラッドの製造方法と用途例.塑性と加工, 2001, 42 (482) :30 [27] [27] 林央.高精度化と環境保全を目指す板材成形.塑性と加工, 2002, 43 (500) :807 [28] [28]张彩碚, 董林, 孟祥敏, 等.不锈钢/铝固液相轧制复合界面的精细结构.金属学报, 1999, 35 (2) :117 [29] [29]陈燕俊, 周世平, 杨富陶, 等.层叠复合材料加工技术新进展.材料科学与工程, 2002, 20 (1) :140 [30] [30]李民权.钢/铝复合板变形规律和性能的研究[学位论文].湖南:湖南大学材料加工学院, 2009 [31] [31]Kawase H, Makimoto M, Takagi K, et al.Development of aluminum clad steel by roll bonding.Trans ISIJ, 1983, 23:628 [32] [32]Danesh Manesh H, Karimi Taheri A.The effect of annealing treatment on mechanical properties of aluminum clad steel sheet.Materials and Design, 2003, 24:617 [33] [33]Wlosinski W, Olesinska W, Pietrzak K.Bonding of aluminum to steel using copper interlayer.Journal of Materials Processing Technology, 1996 (56) :190 [34] [34]杨连发.钢铝层叠复合材料固态复合技术及应用.桂林电子工业学院学, 2004, 24 (3) :90
点击查看大图
计量
- 文章访问数: 289
- HTML全文浏览量: 44
- PDF下载量: 476
- 被引次数: 0