• Overview of Chinese core journals
  • Chinese Science Citation Database(CSCD)
  • Chinese Scientific and Technological Paper and Citation Database (CSTPCD)
  • China National Knowledge Infrastructure(CNKI)
  • Chinese Science Abstracts Database(CSAD)
  • JST China
  • SCOPUS
Advanced Search
Articles in press have been peer-reviewed and accepted, which are not yet assigned to volumes /issues, but are citable by Digital Object Identifier (DOI).
Digital and Intelligent Transformation in Sintering Process: A Review and Outlook
ZHOU Xiang
DOI: 10.3969/j.issn.1000-6826.2025.05.1301
Abstract PDF
One-Step GDMS Determination of Trace Niobium, Tungsten, and Molybdenum in Tantalum Powder
LI Yaqin, HAO Wenting, ZHOU Meiling
Abstract PDF
From Waste to Valuable Feedstock: Converter-Based Resource Utilization of Cold-Pressed Pellets Prepared from Steel Dust
XIA Jingjing, WANG Xinyu, WEI Rufei, LONG Hongming, ZHU Haiya
DOI: 10.3969/j.issn.1000-6826.2025.03.0601
Abstract PDF
Hastelloy C-59: Research Status and Progress in Corrosion Resistance and Formability
SI Jiaxin, NIE Zhiyu, ZHONG Kai, SONG Yanbo
DOI: 10.3969/j.issn.1000-6826.2025.07.0902
Abstract PDF
Optimized Application and Practice of Double Tundish Technology: Enhancing Steel Quality and Casting Efficiency
YANG Tongtong, HU Shaowei, ZHANG Chaojie, ZHANG Liqiang
DOI: 10.3969/j.issn.1000-6826.2024.07.1801
Abstract PDF
Cleaning Up the Surface: How to Control Oxide Scale on Cold-Rolled and Annealed TRIP Steel
BAI Yupeng, LI Jianhui, ZHANG Shuai, ZHANG Yu
DOI: 10.3969/j.issn.1000-6826.2025.06.2401
Abstract PDF
From Layering to Bonding: A Process Strategy for CoCrMo–Ti6Al4V Composite Fabrication Using Selective Laser Melting
LIN Sijing, JIN Tuwei, CHEN Cen
DOI: 10.3969/j.issn.1000-6826.2025.06.3001
Abstract PDF
Analysis of the causes of early fatigue failure of a wheel spoke plate roller
DOI: 10.3969/j.issn.1000-6826.2025.08.0501
Abstract PDF
Evaluation and Research on Application Performance of QP980 Steel for Automobile
DOI: 10.3969/j.issn.1000-6826.2026.03.1101
Abstract PDF
Effect of Ultra?Rapid Cooling Process on Microstructure and DWTT Properties of X60M Pipeline Steel Along the Plate Width Direction
, ,
DOI: 10.3969/j.issn.1000-6826.2026.04.1601
Abstract PDF
Development and Application of a Domestic Fully Automatic Steel Coil Strapping System for Continuous Annealing Lines
DOI: 10.3969/j.issn.1000-6826.2026.04.2302
Abstract PDF
The Practice of Mid-Repair Shutdown and Startup of No. 9 Blast Furnace in Shougang Changgang
DOI: 10.3969/j.issn.1000-6826.2026.05.1801
Abstract PDF
Thoughts on the Construction of the Metallurgical Archaeology Module
DOI: 10.3969/j.issn.1000-6826.2026.06.0181
Abstract
The effect of Si on the properties of copper alloy Cu-0.5Cr-0.15Zr
DOI: 10.3969/j.issn.1000-6826.2026.06.0101
Abstract PDF
Natural Iron-Based Minerals in Heterogeneous Advanced Oxidation for Organic Pollutant Degradation: Properties, Mechanisms, and Modification Strategies
YANG Jiapeng, ZHOU Zhenxing, LU Shaoyong, WANG Chongqing
DOI: 10.3969/j.issn.1000-6826.2025.05.2801
Abstract PDF
Cracking and Wrinkling in Stamping of Galvanized Deep Drawing Steel for TV Backboards: A Study on Annealing Process Optimization
WANG Chao, FU Donghe, WANG Yadong
DOI: 10.3969/j.issn.1000-6826.2025.06.0201
Abstract PDF
Research Progress on Component Design Methods of Biomedical Titanium Alloys
LEI Zheng, LIU Fan, LUO Ying, ZHU Hongkang
DOI: 10.3969/j.issn.1000-6826.2025.04.2901
Abstract PDF
EAF+BOF: A New Path Low Carbon Emission Steel Production
PENG Fei, DUAN Fuchun, LIU Zhe, ZHOU Jun, CHEN Yu
DOI: 10.3969/j.issn.1000-6826.2025.06.2101
Abstract PDF
Exploration of Suitable Theoretical Combustion Temperature for Blast Furnace
,
DOI: 10.3969/j.issn.1000-6826.2026.01.1402
Abstract PDF
Study on Influencing Factors and Process Optimization of Inclined Tank Effluent in Converter Wet Dust Removal Systemon
DOI: 10.3969/j.issn.1000-6826.2026.04.2301
Abstract PDF
Application of Domestic Two-Stand Six-Rolls Temper Mill in Cold Rolling Project
ZHU Aihui
DOI: 10.3969/j.issn.1000-6826.2025.04.0701
Abstract PDF
Numerical simulation study on residual stress field of Q235 steel strengthened by laser shock peening
, ,
DOI: 10.3969/j.issn.1000-6826.2026.03.2401
Abstract PDF
The research of adhesive bonding performance of HSLA Steel for Automobile
,
DOI: 10.3969/j.issn.1000-6826.2025.07.0101
Abstract
Study on Influencing Factors of Edge Defects in Lithium Battery Aluminum Foil Slitting
DOI: 10.3969/j.issn.1000-6826.2026.01.2201
Abstract PDF
Exploring the Microstructural Characteristics of Hundred-forging Steels and Their Educational Significance
DOI: 10.3969/j.issn.1000-6826.2026.04.0301
Abstract
A Study on the Mechanisms of Surface Defects in Hot-Rolled Pickled Steel Sheets
, , , , , , ,
DOI: 10.3969/j.issn.1000-6826.2026.04.0801
Abstract PDF
Production practice of Q450NQR1 hot rolled coil in Donghua Steel
,
DOI: 10.3969/j.issn.1000-6826.2025.11.0801
Abstract PDF
Canny Edge Detection Method for Continuous Casting Ingots Based on an Improved Otsu Algorithm
, , , , , , ,
DOI: 10.3969/j.issn.1000-6826.2026.03.2301
Abstract PDF
Research Process on Two-Dimensional Transition Metal Dichalcogenide/GaN Heterostrutctures and Devices
, , , , , ,
DOI: 10.3969/j.issn.1000-6826.2026.04.2201
Abstract PDF
Study on Hidden Disaster-causing Factors of the Wulan
DOI: 10.3969/j.issn.1000-6826.2025.12.2601
Abstract PDF
Application and Development Trend of Rare-Earth Magnetic Disk in Steel Turbid Circulating Water Treatment
DOI: 10.3969/j.issn.1000-6826.2026.01.2981
Abstract PDF
Stress concentration characteristics and failure mechanism simulation analysis of PG4 rail with defects under dynamic response of wheel-rail contact
DOI: 10.3969/j.issn.1000-6826.2026.02.2601
Abstract PDF
Characteristics, Evolution, and Control Methods of Slag Inclusions in Tinplate Coils
, , , ,
DOI: 10.3969/j.issn.1000-6826.2026.01.2601
Abstract PDF
A Review of Intelligent Algorithms for Endpoint Prediction Technology in Converter Steelmaking
, ,
DOI: 10.3969/j.issn.1000-6826.2026.03.0901
Abstract PDF
Surface Defect Detection of Continuous Casting Billets Based on Improved YOLOv7
,
DOI: 10.3969/j.issn.1000-6826.2026.01.1301
Abstract PDF
A System and Method for Solving the Issue of Low-altitude Pollution in PS-Converters
DOI: 10.3969/j.issn.1000-6826.2026.01.1401
Abstract PDF
Research on Surface Control Technology for Titanium Alloy Grinding
DOI: 10.3969/j.issn.1000-6826.2026.01.2301
Abstract PDF
Discussion and application of key points in the survey of hidden disaster-causing factors in open-pit slopes
, , , ,
DOI: 10.3969/j.issn.1000-6826.2026.02.0301
Abstract
Technical Upgrading and Centralized Control Reconstruction of L1/L2 Control System for 1# Rolling Mill 2800 Finishing Line
DOI: 10.3969/j.issn.1000-6826.2026.02.0901
Abstract PDF
XGBoost-Based Temperature Drop Prediction for Hot Metal at Iron-Steel Interface
, , , , ,
DOI: 10.3969/j.issn.1000-6826.2026.03.0601
Abstract PDF
Optimization of Bottom-Blowing Configuration in an 80-ton Elliptical Ladle
, , , , , ,
DOI: 10.3969/j.issn.1000-6826.2026.01.1501
Abstract PDF
Optimization of Surface Color Difference Defect Detection Algorithm Based on Parsytec
DOI: 10.3969/j.issn.1000-6826.2025.10.2001
Abstract PDF
Effect of Cold Deformation and Heat Treatment on the Tensile Properties of Titanium-Zirconium Alloy
DOI: 10.3969/j.issn.1000-6826.2025.12.1901
Abstract PDF
Optimization Study on Hot Charging and Direct Feeding Production Process for Billets Based on Direct Hot Rolling
, , ,
DOI: 10.3969/j.issn.1000-6826.2025.07.1602
Abstract PDF
Research status of the main influencing factors on the friction properties of metallic materials
DOI: 10.3969/j.issn.1000-6826.2025.07.2681
Abstract PDF
Study on Water Bath Quenching Technology of High Carbon Steel Wire Rod and Its Influence on the Microstructure and Properties
DOI: 10.3969/j.issn.1000-6826.2025.07.2802
Abstract PDF
Study on the relationship between excessive edge airflow and small sleeve leakage in blast furnace
DOI: 10.3969/j.issn.1000-6826.2025.07.2901
Abstract PDF
A Comparative Study on the application performance of 550/980 high-strength steel with different composition systems
DOI: 10.3969/j.issn.1000-6826.2025.08.2801
Abstract
Design and Effect Evaluation of Anti-corrosion Material Selection for Stainless Steel in Tap Water Production Plant
, , , ,
DOI: 10.3969/j.issn.1000-6826.2025.09.0401
Abstract PDF
Study on Filiform Corrosion of Paint Film on Hot-Dip Galvanized Sheets
DOI: 10.3969/j.issn.1000-6826.2025.09.0501
Abstract PDF
The influence of decarburization on the mechanical properties of 2000MPa-grade cable steel wires
, , , , , , , , ,
DOI: 10.3969/j.issn.1000-6826.2025.09.1602
Abstract PDF
Study on the Corrosion Resistance of Pretreatment Coatings on Galvanized Steel Surface
DOI: 10.3969/j.issn.1000-6826.2025.09.2201
Abstract PDF
Analysis of Failure of Standard Parts Cold Forging Dies
,
DOI: 10.3969/j.issn.1000-6826.2025.09.2401
Abstract PDF
Preparation and Performance Study of High-Activity Porous Silver Powder for Laser-Assisted Sintering
DOI: 10.3969/j.issn.1000-6826.2025.10.1201
Abstract
Effect of Mold Flux Moisture on the Surface Quality of Continuous Casting Blooms and Its Control Measures
, , , ,
DOI: 10.3969/j.issn.1000-6826.2025.10.1301
Abstract PDF
Earing analysis of Cu/Steel/Cu composite plate stamping part
DOI: 10.3969/j.issn.1000-6826.2025.10.1701
Abstract PDF
Status of refractory materials for RH furnace alloy Feeding port and measures to prolong its service life
DOI: 10.3969/j.issn.1000-6826.2025.12.0201
Abstract PDF
Transformation mechanism of microstructure and mechanical properties of Ti2alnb alloy after aging treatment
,
DOI: 10.3969/j.issn.1000-6826.2025.12.2302
Abstract PDF
SUN Li
DOI: 10.3969/j.issn.1000-6826.2025.04.1701
Abstract PDF
Optimization Design and Experimental Research on Explosive Welding Process Parameters for Niobium/Steel
, ,
DOI: 10.3969/j.issn.1000-6826.2025.02.1301
Abstract PDF
Practice of Production Process for Oil Drilling Casing Steel
DOI: 10.3969/j.issn.1000-6826.2025.02.0501
Abstract PDF
Overview of Microstructure Evolution Principls for Ti2AlNb alloy on
DOI: 10.3969/j.issn.1000-6826.2024.04.1001
Abstract PDF
Hu Lifa1,2, Zhou Lian1, Wang Jinxing2, Zhang Pingxiang1, Li Chengshan1, Yang Shizhong2
DOI: 10.3969/j.issn.1000-6826.2024.04.0501
Abstract PDF
Practice of Long Life Square Billet Stopper Tundish
Wenhui WANG, Wenxiang ZHANG, Mingzhen Jiang, Xiaoyang WU, Xuemin Li
DOI: 10.3969/j.issn.1000-6826.2023.01.0701
Abstract PDF
Process Design Characteristics of 500 m2 Sintering Machine in Tanggang New Area
DOI: 10.3969/j.issn.1000-6826.2024.01.2401
Abstract PDF
Analysis of Design Issues for 360m2 Sintering Machine in Tanggang New Area
DOI: 10.3969/j.issn.1000-6826.2024.01.0201
Abstract PDF
/Machining process planning based on pattern recognition and deep learning
DOI: 10.3969/j.issn.1000-6826.2023.11.1601
Abstract PDF
The application of PLC technology in the eight machine eight strand continuous casting machine for square billets
DOI: 10.3969/j.issn.1000-6826.2023.12.1301
Abstract PDF
Research on Design and Construction Technology of Prefabricated Steel Structure Building
DOI: 10.3969/j.issn.1000-6826.2023.07.2381
Abstract PDF
Study on Optimization of ZW Roots Fan under Operation Condition
DOI: 10.3969/j.issn.1000-6826.2023.08.3081
Abstract PDF
Category
When Titanium-steel Clad Plates Submerge into the Deep Sea: How Hydrostatic Pressure Alters Their Corrosion Performance
ZUO Jiangsizhi, WANG Zhiwei, JIANG Xuzhou, YU Hongying, SUN Dongbai
2026(4): 1-7. DOI: 10.3969/j.issn.1000-6826.2026.04.0861
Abstract PDF
Strengthening Mechanisms of Carburized Layers in Bearing Rings: Reshaping of Microstructure and Mechanical Properties
ZHAO Zhifu, ZHANG Xibing, LI Zhengyi, ZHOU Jun, LIU Xiaoming
2026(4): 8-14. DOI: 10.3969/j.issn.1000-6826.2026.04.0961
Abstract PDF
A Materials Showdown in Hot and Cold Seawater: Corrosion–wear Behavior of Copper Alloy–polyurethane Tribopairs
REN Pengwei, LI Zhengyi, WANG Jianzhang
2026(4): 15-20. DOI: 10.3969/j.issn.1000-6826.2026.04.2361
Abstract PDF
Corrosion–wear Behavior of High-strength Aluminum Alloys under High Hydrostatic Pressure: A Lightweighting Challenge for Deep-sea Mining
LI Zhengyi, LIU Xiaoming
2026(4): 21-26. DOI: 10.3969/j.issn.1000-6826.2026.04.1861
Abstract PDF
Deep-earth Resource Development Continues to "Dig Deeper": Understanding the Complex Deep Environment and Controlling Engineering Risks is the Foundation
JI Hongguang, ZHANG Chunrui, KUANG Danyang, LI Chang
2026(4): 27-34. DOI: 10.3969/j.issn.1000-6826.2026.04.3061
Abstract PDF
Going Deep Underground: How Nitrogen Affects the Stability of Vanadium-containing High-strength Steel
LI Zhen
2026(4): 35-40. DOI: 10.3969/j.issn.1000-6826.2026.04.2661
Abstract PDF
Venturing into Deep Sea and Deep Earth: Challenges in the Application of Key Metallic Materials for Service in Extreme Environments
HAN Yang
2026(4): 41-46. DOI: 10.3969/j.issn.1000-6826.2026.04.0862
Abstract PDF
Metallic Materials for Space Nuclear Reactors: Selection and Challenges in Extreme Environments
MI Zhengpeng
2026(4): 47-52. DOI: 10.3969/j.issn.1000-6826.2026.04.1561
Abstract PDF
Toward a New Era of Commercial Spaceflight: Challenges and Prospects for Metallic Materials in Extreme Environments
LIU Wenping, FU Shiming, ZHANG Jingxu
2026(4): 53-60. DOI: 10.3969/j.issn.1000-6826.2026.04.1562
Abstract PDF
Bringing Materials Science to the Public: Science Communication Pathways for Metallic Materials in Extreme Environments
DAI Donglei, WANG Zhe, GE Chang, CUI Chengfeng
2026(4): 61-66. DOI: 10.3969/j.issn.1000-6826.2026.04.2061
Abstract PDF
From Classroom Metals to the Vast Frontiers: How Chemistry Lessons Connect Deep Space, Deep Sea, and Deep Earth
GAO Xudong, WANG Zhe, JI Hong, JIA Haijing
2026(4): 67-72. DOI: 10.3969/j.issn.1000-6826.2026.04.2561
Abstract PDF

Total visits    

Today's visit